Field Controls FAVC Installation Manual Download Page 1

www.fi eldcontrols.com

Please retain these instructions after installation.

This device 

MUST

 be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of 

a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged 
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 
precautions required, and has complied with all the requirements of the authority having jurisdiction.

Installation Date:

Installed By:

Phone:

Model: FAVC

ITEMS INCLUDED:

1 – Fresh Air Ventilation Controller

1 – Mounting Hole Template

1 – Instruction and Installation Manual

1 – Mounting Packet containing 
      two (2) Sheet Metal Screws

1 – ODT Sensor Packet containing
      temperature sensor, sheet metal
      screw and two (2) wire nuts

FRESH AIR VENTILATION CONTROL

P/N 780100700 07/18  Rev F

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY 

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

BEFORE PROCEEDING WITH THE INSTALLATION.

•  Meets the requirements of the ASHRAE 62.2 standard for ventilation. 
•  Supplied with an outdoor temperature sensor which mounts in the fresh air duct.
•  Has three selectable Climate Zones with unique ventilation inhibit parameters for the selected    
   climate.
•  Monitors up to four exhaust appliances within your home to adjust ventilation needs based on 
    total appliance operation.
•  Can provide Make-Up air in response to an exhausting appliance.
•  Can utilize an exhaust fan to drive ventilation independent of the central HVAC fan to save energy. 
•  Continuously monitors indoor Relative Humidity:
 

    -   Lower excess indoor humidity during hot muggy days by reducing ventilation during 

 

        these  periods to prevent discomfort and mold growth in the home. 

 

    -   Reduce condensation and corrosion of the heat exchanger.

The Field Controls Fresh Air Ventilation Control 

TM

 (FAVC) is designed to provide fresh air ventilation 

year-round, keeping energy conservation, indoor air quality and comfort in mind. The FAVC delivers 
ventilation along with many additional features:

Summary of Contents for FAVC





































Reviews: