background image

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869

THANK YOU!

  for purchasing the Primetime Lite Aluminum Climber by Primal Vantage Company Inc. 

Every year serious injury and even death occurs from hunting related falls.

 To ensure your safety, please 

COMPLETELY

 read and follow this safety 

manual and ALL warning labels 

BEFORE

 assembling, installing or utilizing this product.

DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE 
UNSURE ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE 
DEPARTMENT AT 1-866-972-6168 OR VISIT 

WWW.TREESTANDCUSTOMERSERVICE.COM

.  KEEP AND MAINTAIN THIS SAFETY AND INSTRUCTION 

MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE. 

Warning

SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT

MODEL: HEH00557

Always Wear a Safety Harness with this Product 

Practice Using at Ground Level
Weight Limit: 300 lbs.
Tree Size: 9”-18” diameter

PRIMETIME LITE

ALUMINUM CLIMBER

Instruction and Safety Manual

©2011 (rev 12/10)

Summary of Contents for PRIMETIME LITE HEH00557
















Reviews: