BASIC OPERATION
8
CONNECTION #1 : POWER MODULE WITH ONE
BATTERY MODULE
Rotate the battery cable retention bracket and tighten
the two screws to fix battery cable.
CONNECTION #2 : POWER MODULE WITH
MULTIPLE BATTERY MODULES
Step 1: Use the battery cable to connect the 2
nd
Battery
module to the 1
st
Battery module.
Step 2: Rotate the battery cable retention bracket and tighten
the two screws to fix battery cable.
Battery Installation and replacement
Step 1:
Remove the front panel. Remove the retaining
screws from the battery bracket and then remove the cover
itself. undraw the connectors.
Step 2:
Pull the battery tray out slowly. Put the new battery
tray back into the compartment after that.
Step 3:
Fasten the battery bracket and then insert the
connectors. Place the connectors in the bracket.
Step 4:
T
ighten the screws of the battery bracket and front
panel .