37
6.10.1.2 Recall LO/HI weight limits from PLU
Follow the below steps to recall LO and HI limits.
1.
Select desired operation mode and weight unit, then press and hold
[CHECK]
for 2 seconds.
2.
Instrument displays
CHK =?
. Press PLU position (numeric key 0 ~ 9)
then press
[PRINT/M+]
to recall the LO & HI limits stored in that
position.
3.
Instrument displays LO and HI limits and these values are now
effective.
6.10.1.3 Clear LO/HI weight limits from PLU
Refer to
6.10.1.1
. Enter zero value for both LO and HI limits in step number 2
and 3. Then press the preferred PLU position to clear.
6.10.2 LO/HI limit PLUs for quantity
6.10.2.1 Save LO/HI to PLU
Follow the below steps to save LO and HI limits for quantity.
1.
Go to piece count mode under desired weight unit, then press
[CHECK]
.
2.
Instrument displays Low followed by a 6-digital value. Enter the LO
quantity limit through numeric keys then press
[PRINT/M+]
.
3.
Instrument displays HIGH followed by a 6-digital value. Enter the HI
quantity limit through numeric keys then press and hold
[CHECK]
for
2 seconds.
4.
Instrument displays
Save =?
. At this point: -
Press the preferred PLU position (numeric key 0 ~ 9), then
press
[PRINT/M+]
to save to that PLU position and utilize
these limits immediately, or
Press
[PRINT/M+]
to utilize these limits immediately but
without saving to PLU, or
Press
[ZERO]
to quit.
6.10.2.2 Recall LO/HI quantity limits from PLU
Follow the below steps to recall LO and HI limits.
1.
Go to piece count mode under desired weight unit, then press and
hold
[CHECK]
for 2 seconds.
Summary of Contents for 19e
