Fidelis Deception Decoy Server FDH-1000-C, Quick Start Manual

Page: 7 / 15

7
.
www.fidelissecurity.com
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
5. Decoy Server – Logical Network Configuration
Configure the Admin and iLO according to your network configuration. See the table below as a sample.
Appendix A has a worksheet you can use.
Note: The logical configuration for decoys is done as part of the decoys creation process.
Sample Configuration for Decoy Server
Network Setting Assignments
Interface Admin iLO
Hostname (FQDN) DecoyServer1.myorg.int
Static IP Address 10.1.2.3 10.2.3.4
Subnet Mask 255.255.255.0 255.255.255.0
Gateway 10.1.2.1 10.2.3.1
Proxy Server 10.5.6.7
DNS Servers 8.8.4.4, 8.8.8.8
NTP Servers 0.pool1.ntp.org
Time Zone
UTC (+0)
6. Appliance Installation
Rack Installation
Install each appliance in an enclosure/location that has necessary power and cooling. Ensure that the
installation environment is within the operating temperature of the appliance. See
Appendix B for
appliance operating temperature requirements.
Power
Connect power cables to the power supplies in the back of the appliance. See Appendix B for appliance
power requirements.
Network Cabling
Using the connectors and cables described in sections 3 and 4, begin to connect the appliances to the
networks. Cable the sensor appliance(s) to the switches:
1. Connect the Admin (eth0) port to the ADMIN switch port.
2. Optionally, connect the iLO port to the ADMIN (or iLO) switch port.