6
.
www.fidelissecurity.com
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
7. Appliance Network Configuration
Start the Appliance Network Configuration
1. Power on the appliance(s).
2. Connect to the component CLI using either of the following:
‒
Via KVM Console, see
Option 1: Connect to the Component CLI Using KVM Console
‒
Via iLO, see
Option 2: Connect to the Component CLI Using iLO
Option 1: Connect to the Component CLI Using KVM Console
1. Connect a keyboard and monitor to the appliance.
2. Continue with
Complete the Appliance Network Configuration
Option 2: Connect to the Component CLI Using iLO
iLO supports DHCP by default. If you need a static IP address, before performing this procedure, first
follow
Configuring iLO to Use a Static IP Address
1. Log into the iLO console:
https://<
IP address
>
where <
IP address
> is the iLO IP address
2. Specify the credentials:
‒
Username - Administrator
‒
Password - A random eight-character string
‒
DNS name - ILOXXXXXXXXXXXX, where the X characters represent the server serial
number.
The iLO firmware is configured with a default username, password, and DNS name. The default
information is on the serial label pull tab attached to the server that contains the iLO management
processor. Use these values to access iLO remotely from a network client by using a web
browser.
3. In the iLO web interface, navigate to
iLO Integrated Remote Console
.
4. Select
Power & Thermal
.
5. Click
Reset
.
The system shuts down and restarts. For Fidelis Network appliances version 9.4.1 or later, a
screen similar to below is displayed. If you do not see this screen, contact Fidelis Customer
Support.
6. Continue with
