manualshive.com logo in svg

FIC FR33E, Manual

Share
Download
FIC FR33E Manual Download Page 42

3 - 14

FR33E Mainboard Manual

SB I/O Base Address

This feature allows you to select the SB I/O base address, if the onboard

Legacy audio chosen. The options are: 220H, 240H, 260H, 280H.

SB IRQ Select

This feature allows you to select the SB IRQ, if the onboard Legacy audio

chosen. The options are: IRQ 5, IRQ 7, IRQ 9, IRQ 10.

SB DMA Select

This feature allows you to select the SB DMA channel, if the onboard

Legacy audio chosen.

The options are: DMA 1, DMA 2, DMA 3, DMA0.

MPU-401

This feature allows you to enable MPU-401, if the onboard Legacy audio

chosen. The options are: Disabled, Enabled.

MPU-401 I/O Address

This feature allows you to select the MPU-401 I/O address, if the onboard

Legacy audio chosen.

The options are: 310-313H, 320-323H, 330-333H, 300-303H.

Game Port (200-207H)

This feature allows you to select the game port (200-207H), if the onboard

Legacy audio chosen.

The options are: Enabled, Disabled.

Sound Blaster

This feature allows you to set audio to Sound Blaster mode, if the onboard

Legacy audio chosen. The options are: Enabled, Disabled.

Summary of Contents for FR33E





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands