manualshive.com logo in svg

FIC 1stMainboard VG33, Manual, Page: 4 / 38

Share
Download
FIC 1stMainboard VG33 Manual Download Page 4

ii

VG33 Mainboard Manual

PS/2 Keyboard and Mouse Connector .............................. 2-14
Universal Serial Bus Connectors ....................................... 2-14
Serial Port Connectors ....................................................... 2-15
Printer Connector .............................................................. 2-16
Audio I/O Jacks ................................................................ 2-16
Video Graphics Accelerator Connector .............................. 2-17
LAN Connector ................................................................. 2-17
IEEE 1394 Connectors (mfg. optional) ............................... 2-18

Chapter 3 BIOS Setup

Main Features Setup ...................................................................... 3-1
Advanced Features Setup ............................................................. 3-3

Onboard device Configuration .................................................. 3-5
I/O device Configuration ........................................................... 3-6
Hardware Monitor ..................................................................... 3-7

Power Features Setup ....................................................................    3-8
Boot  Features  Setup ......................................................................    3-9
Exit Features Setup ........................................................................    3-10

Summary of Contents for 1stMainboard VG33







































Reviews:

No comments