Zusatzanleitung MC07B_GB.doc
gedruckt am 27.04.17
Seite
9
von
17
FIBRO GmbH, Bereich Rundschalttische
D 74183 Weinsberg, Postfach 1120
Tel.: +497134/73-0 Fax: +497134/73-218
FIBRO
RUNDSCHALTTISCHE
Additional remarks for the option CW
– CCW operation
Remarks for CW
– CCW operation
CW
– CCW operation means the free selection of the directional sequence. The following cycle has to be pre-
selected.
The indexing table can be cycled to the selected direction via external actuation (selection switch, PLC outputs) of
the inputs
DI01
or
DI02
of the frequency inverter.
For the description of the software sequence refer to page 3 and 4.
Prior to the start the inputs of the frequency inverter must be set to high signal >2ms.
Remarks with Potentiometer
Once the software with potentiometer is needed, can you talk about the speed control (potentiometer)
Half of motor speed to full speed motor-drive set. If you want to below half speed drive, so you need an additional
fans, as well as additional built-in motor thermal protection.
