Operating instructions WPM Gateway IoT
47/76
Set up WPM Gateway
8
SET UP WPM GATEWAY
8.1
Data holder – Changing parameters
In the
Configuration
view of a data holder, the individual parameters of a data holder can be
changed.
Open view:
Main menu => Data holder =>
=> Configuration
Fig. 8-1 Data holder – Changing parameters
Data holder – Change name
1) Enter a new data holder name in the
Data holder name
input field (maximum 15 characters).
2) Click the
Save
button to apply the new data holder name.
Data holder – Lock changes
1) In the
Lock
selection box, activate the lock parameter by checking the check box.
–
If the lock parameter is enabled, data holder parameters can only be changed after con-
firmation via a confirmation prompt.
2) Clicking the
Save
button applies the new status to the lock parameter.
The other parameters of a data holder can be changed in the same way.
Descriptions of the parameters can be found in Chapter 7.4.2.5 "Data holder – Current param-
eters" on page 41.
