Drill or Hammer drill
Masonry Install
Installing in Concrete, Block or Brick.
Safety Glasses
Pencil
32” Apart
Measure
to match
Height
Step 2.
Drill Lag Shield locations
1. On center Mark, use a ½” Drill bit and drill 2.5 to 3” deep.
2. Repeat this for all 8 holes
3.Insert Lag Shields ( “Hole” label side first) Tap with Hammer into
place.
Step 3.
Fasten bolts and test weight
Note:
For oversize tires
32” and larger.
Instead of a
straight line,
do a zigzag pattern
offsetting for
additional size.
1 /2”
Ratchet
1.Fasten all 8 Bolts using a ratchet.
2.Test each Hanger by pulling it up and down
with one arm to make sure its securely in the
wall.
3. Press plastic Caps over each Bolt Head
(to protects your wheels from scratching)
Use Hanger
As a Hole
Template
1 /2” Drill bit
“Hole”
label
Step 1.
Locate and Mark Studs
(Hole center accuracy required so be precise)
Hammer
