Drill
Stud Finder
Wood stud with drywall Install
Skip to next section installing into Masonry (Block or Brick)
Safety Glasses
Step 1.
Locate and Mark Studs
Pencil
Measure
to match
Height
Step 2.
Pre-drill Bolt locations
3 /16” Drill bit
1. Center top hanger hole over the marked locations and drill 3”
deep.
2. Repeat this for all 8 holes using the hanger as a template.
( you should see wood dust come out with the drill bit).
Step 3.
Fasten bolts and test weight
Note:
For oversize tires
32” and larger.
Instead of a
straight line,
do a zigzag pattern
offsetting for
additional size.
1 /2”
Ratchet
1.Fasten all 8 Bolts using a ratchet.
2.Test each Hanger by pulling it up and down
with one arm to make sure its securely in the
stud.
3. Press plastic Caps over each Bolt Head
(to protects your wheels from scratching)
Stud
