Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights reserved.
FG360-NA Hardware Guide
10/28
2.3
Antenna Configuration
FG360 module supports seven antennas and the configuration is as below table:
PAD Function
Description
Band
Configuration(TX)
Band
Configuration(RX)
Frequency
Range(MHz)
130
LMHB TRX
B2/4/5/7/12/13/14/17/
25/30/41/66/71
n2/25/41/66/71
B2/4/5/7/12/13/14/17/25/30/
41/66/71
n2/25/41/66/71
617~2690
175
41TRx+MHB/UCB/
LAA Rx
B41
n41
B2/4/7/25/30/41/48/66
n2/25/41/66
1710~5925
157
MHB/UCB/LAA Rx
Only SRS
B2/4/7/25/30/41/48/66
n2/25/41/66
1930~5925
139
LMHB Rx
Only SRS
B2/4/5/7/12/13/14/17/25/30/
41/66/71
n2/25/41/66/71
617~2690
148
Reserved
193
Reserved
199
GNSS
GNSS receive
2.4
Waring
2.4.1
Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in fixed applications, according to Part 2.1091(b).
3. The separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations
4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify
compliance as a composite system. When testing the host device for compliance with Part
15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the
transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation
should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band
emissions). The host manufacturer must verify that there are no additional unintentional emissions other
than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s).
The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed.