Fiberplex FOM-3841, User Manual

Page: 8 / 16

Front Displays
Figure 2 FOM‐3841/3842 Front Display
These LEDs indicates status as per the following table
POTS Exchange
Power
Optics
SW Option
Off Hook
Off Hook
Off Hook
Off Hook
Ringing
Ringing
Ringing
Ringing
CH 1
CH 2
CH 3
CH 4
FOM-3842
POTS Subscriber
Power
Optics
SW Option
Off Hook
Off Hook
Off Hook
Off Hook
Ringing
Ringing
Ringing
Ringing
Ring Down
CH 1
CH 2
CH 3
CH 4
Display LED Indicators
Label Status Description
Power Steady Green The power supplies on the card are operating properly.
Steady Red The power supplies on the card are not regulating the correct voltages or there is an
open fuse on the card. Unplug the power from the card for 30 seconds and then plug
it in again so that the fuse on the card has time to reset. If the Power led is still red or
not a constant green, replace the card.
Off Card failure or main power failure.
Optics Steady Green Optics in sync at each end of link
Flashing Green Local optical RX is receiving errors
Steady Yellow Remote optical RX loss of signal or sync
Flashing Yellow Local optical RX signal present, but no sync
Flashing Orange Card type mismatch at remote end; the two cards are not compatible
Steady Red No optical RX signal
Off Card failure
SW Option Steady Green No Function
Off Hook Yellow Line is off hook
Off Line is on hook
Ringing Yellow Line is ringing
Off Line is idle
Ring Down Yellow Fom‐3842 is paired with another FOM‐3842 for 4‐channel ringdown
Off Normal POTS operation