background image

Page 9

Fiberlink® 6654 Series User’s Manual

Fiberlink® 6654 Series

Operating Pointers

Remember to check attenuation of the fiber optic cable. The system will only operate 
properly if these specifications fall within the range of the system’s loss budget.

Troubleshooting

Multimode fiber optic cable contains an optical fiber with a light carrying “core” that is 
only .0025 inches (62.5 microns) in diameter. Single mode fiber optic cable has an even 
smaller “core,” only .00032 to .0004 inches (8-10 microns). This is smaller than a human hair! 
Therefore, any minute particles of dirt or dust can easily block the fiber from accepting or 
radiating light. To prevent this from happening, always use the provided dust caps when 
ever optical connectors are exposed to air. It is also a good idea to gently clean the tip of an  
optical connector with a lint-free cloth moistened with alcohol whenever dust is suspected. 

The status of the LED’s should provide the first clue as to the origin of any operational  
failure. If these are off, it usually means that the battery has failed in the unit.

If, after reviewing the above possibilities, the system is still not operating, please contact 
the Customer Service Department for further assistance. If you suspect your problem is 
caused by the optics or the fiber optic cable, and you have an optical power meter, please 
take the appropriate measurements prior to contacting support.

Maintenance and Repairs

The Fiberlink® 6654 Series has been manufactured using the latest semiconductor devices 
and techniques that electronic technology has to offer. They have been designed for long, 
reliable and trouble-free service and are not normally field repairable. 

Should difficulty be encountered, Communications Specialties maintains a complete 
service facility to render accurate, timely and reliable service of all products. 

The only maintenance that can be provided by the user is to ascertain that optical  
connectors are free of dust or dirt that could interfere with light transmission and that  
connections are secure and accurate. 

All other questions or comments should be directed to our Customer Service Department. 
It should be noted that many “problems” can easily be solved by a simple telephone call.

Operating Pointers | Troubleshooting 

Maintenance & Repair

Summary of Contents for 6654 Series













Reviews: