
2
Safety Precautions
Do not touch any component or wires on the
ESD Protection
Caution
To prevent laser radiation from injuring eyes,
end face of the fiber or fiber connector directl
Laser Safety
Warning
Do not touch any component or wires on the
protection measures should be taken if it is n
Before the equipment is powered on, the cabin
earth ground cable should be well grounded. C
ground resistance meet the specification.
Grounding Requirements
Caution
Different types of cables at the installation
separately. Please note that optical fibers
Exercise care if you must bend fibers. If b
never be less than 30 mm.
Th
bl
b
d i h
d
Binding Cables
Caution
ESD protection gloves
2
The cables are bound with proper and equ
arranged in good order. The extra parts of
points.
Prior to equipment installation, please inspec
(especially the earth ground cable), and supp
for installation are satisfactory, start the work
refer to
Installation Reference
for more detail
Inspection Prior to Installation
Caution
2
equipment or metal conductors in sockets ESD
do not look into the
ly with naked eyes.
Laser class
identifier
equipment or metal conductors in sockets. ESD
ecessary to touch the equipment during maintenance.
ESD protection
net protection earth ground cable and subrack protection
Check and ensure that the insulation resistance and
n site should be laid out independently and bound
should be bound with dedicated fiber binding straps.
bends are necessary, the fiber bending radius should
l
i
b t
th
Th
bl bi d
S p otect o
wrist strap
2
ual spacing between them. The cable binders are
f the binders are cut from the root without leaving sharp
ct the equipment room, cabinet, power supply, cables
porting facilities. After confirming that the conditions
k following the project designing documents. Please
s.
2