Fiber Instruments Sales ATLAS MINI OTDR, Manual

Page: 9 / 23

9
ATLAS MINI OTDR User guide
REAL TIME MODE:
Parameter settings->Test time->Average mode press
【 REAL/AVG 】
key enter the real-
time measurement mode. The current circuit is measured in real time and the
measurement parameters cannot be modified in the measurement mode. If the
parameters need to be modified, the test needs to be stopped first. Event analysis will not
be conducted during the real-time test, and event analysis will only be conducted after the test
is stopped.
REAL TIME MODE
Average mode
Parameter settings/Test time/XX seconds Press
【
REAL/AVG
】
key enter the real-time measurement
mode, The trace (or sometimes referred to as “Curve”) consisting of the average values measured
over a period of time can be displayed. The length of time can be edited in the "measurement
time" option in [SETUP].
Average mode