05
Chapter 1 Technical Parameters
1.1 Applicable Fiber Type
1.2 Splice Loss
1.3 Splice Mode
SM(ITU-TG.652&G.657)/MM(ITU-TG.651)/DS(ITU-TG.653)/NZDS(ITU-TG.655)
/ITU-TG.657A/ITU-TG.657B
Fiber count: Single
Applicable fiber / cable diameter: 0.25mm/0.9mm/2.0mm/2.4mm/3.0mm/ Indoor
Cable
Applicable fiber diameter: Cladding diameter: 80mm to 150μm / Coating
diameter:100 to 1000μm
Same fiber is spliced, measured by insertion method relevant to ITU-T standard.
The typical values of splice loss are:
SM:0.02dB
MM:0.01dB
DS:0.04dB
NZDS:0.04dB
G.657:0.02dB
128 kinds of splice modes; 38 kinds of preset splice mode
It can store up to 10,000 records and 2,000 Splice images.
Splice time: 10s average SM / SM, 6s Quick mode.
1.4 Heat Oven
3 kinds of applicable protection sleeve: 40mm, 60mm, SC Connector
Heating time: 8 to 900s optional.
Cooling time: 0 to 180s optional
Typical heating time: 10s, micro Sleeve 60mm coating dia. 250um 5s
Heating mode: 32 in-built heat modes available; 10 kinds of preset heating mode
Heater: Specific heater for fusion splicer.
