20
Chapter 4 Splice Mode
4.1 Displaying the Active Splice Program
has an intuitive and simple but very powerful program structure to
operate. Splice programs define arc currents, splice times as well as various
parameters used when performing a splice. Therefore, it is essential to select the
correct splice program.
There are a number of “Preset” splice programs for common fiber combinations.
Therefore, it is much easier to modify and further optimize the parameters for more
unusual fiber combinations.
The active splice program is
always displayed at the top of the
screen (as shown in the picture).
4.2 Selecting a Splice Program
To select another splice program
other than the active one, you
must enter Select splice mode
menu.
① Enter main menu
