18
ADVAnCED PARAMETERS
18. Second channel - pulse time for flashing mode (only FGS-223)
This parameter allows to set time of switching to opposite state in
flashing mode.
Available settings:
1-32000
(0.1-3200.0s, 0.1s step) - time param-
eter
Default setting:
5
(0.5s)
Parameter size:
2
[bytes]
20.
Switch type
This parameter defines as what type the device should treat the
switch connected to the S1 and S2 terminals.
Available settings:
0
- momentary switch
1
- toggle switch (contact closed - On, contact
opened - OFF)
2
- toggle switch (device changes status when
switch changes status)
Default setting:
2
Parameter size:
1
[byte]
21.
Flashing mode - reports
This parameter allows to define if the device sends reports during the
flashing mode.
Available settings:
0
- the device
does not send
reports
1
- the device
sends
reports
Default setting:
0
Parameter size:
1
[byte]
27. Associations in Z-Wave network security mode
This parameter defines how commands are sent in specified asso-
ciation groups: as secure or non-secure. Parameter is active only in
Z-Wave network security mode. This parameter does not apply to 1st
„lifeline” group.
Available settings:
1
- 2nd group sent as secure
2
- 3rd group sent as secure
4
- 4th group sent as secure
8
- 5th group sent as secure
Default setting:
15
(all)
Parameter size:
1
[byte]
28. S1 switch - scenes sent
This parameter determines which actions result in sending scene IDs
assigned to them.
Available settings:
1
- Key pressed 1 time
2
- Key pressed 2 times
4
- Key pressed 3 times
8
- Key Hold Down and Key Released
Default setting:
0
Parameter size:
1
[byte]
NOTE
Parameter 27 values
may be combined,
e.g. 1+2=3 means that
2nd & 3rd groups are
sent as secure.
i
NOTE
Parameter 28 values
may be combined,
e.g. 1+2=3 means that
scenes for single and
double click are sent.
i
Summary of Contents for FGS-2x3
Page 2: ......