20
CONFIGURATION
-
CONNECTING TO THE NETWORK
Connecting to the network
After selecting your Intercom from the list, you can establish a network connection.
You can do this in three ways: via
Wi-Fi
or
LAN
(automatically or manually).
Wi-Fi connection
Make sure that the range of Wi-Fi signal is good enough. If the Intercom is located far from Wi-Fi router,
it is strongly recommended to use Wi-Fi signal expanders nearby the Intercom.
1) Select
Connecting
via Wi-Fi.
2) Choose your Wi-Fi network from the list.
3) You can choose the network from the list or set it up manually.
The list shows Wi-Fi networks in Intercom range. It is not a list of networks found by your phone.
4) Provide a password to the network.
5) It is also possible to set up Wi-Fi connection manually. Provide credentials of your network.
Automatic LAN connection
After successful connection Wizard takes you straight to
User Con
fi
guration
.
Manual LAN connection
Provide necessary credentials: IP Address, Subnet mask, Gateway, and DNS. After that go to
User Con
fi
guration
.
After successful con
fi
guration of the device (resulting in streaming the live view from the Intercom) it is strongly recommended to
assign a
fi
xed IP address of the device in your router. It makes the device integration easier.
If the connection with the device is not successful, it may be necessary to reset your device to factory settings. Reset procedure is
described in “Resetting to factory settings“ on page 24.
i
i
i
i
www.domotica-shop.nl