12
OPERATInG THE DEVICE
#6: Operating the device
Controlling the Dimmer 2 using a switch:
Momentary switch
(after releasing the switch a spring automatically
pushes back and disconnects the switch):
• Turning the light On/OFF: change the position of switch no. 1. The
Dimmer 2 will be activated always at previously set brightness
level.
• Brightening/dimming the light: hold switch no. 1 down. When the
switch is held down, the Dimmer 2 will always reach the extreme
value of 1% or 99%.
• Turning the light On completely: fast double-click switch no. 1.
The Dimmer 2 will set the load at 99%.
Toggle switch
(operates as a two-position switch, it has no spring
that would set one position of the switch):
• Turning the light On/OFF: toggle switch no. 1. The Dimmer 2 will
be activated always at previously set brightness level.
• Turning the light On completely: toggle twice switch no. 1. The
Dimmer 2 will set the load at 99%.
Controlling the Dimmer 2 using FIBARO Home Center controller:
After adding the Dimmer 2 to the network, it will be represented in
the FIBARO Home Center controller by the following icon:
Dimming/brightening is performed by moving the slider. The current
status of the Dimmer 2 is shown on the bar indicator.
Turning the device On/OFF – On and OFF icons are used for setting
the last saved state or turning off the Dimmer 2.
Summary of Contents for FGD-212
Page 2: ......