Fiat TIPO 4DOORS, Owner'S Handbook Manual, Page: 113 / 388

place the chock 1 on the wheel
diagonally opposite the one to be
replaced (see fig. 117 ) to prevent the
vehicle from moving irregularly when it
is lifted from the ground;
for versions with steel rim: remove
the hub cap 1 fig. 118 using the
specific tool 2 fig. 119, located in the
tool container: grip the tool with two
fingers, insert the tongue between tyre
and hub cap and pull towards yourself
perpendicular to the wheel;
loosen the bolt of the wheel to be
replaced by about one turn with the
wrench provided 1 fig. 120; rock the car
to make it easier to separate the rim
from the wheel hub;
operate the device 1 fig. 121 to
extend the jack until the top of the jack
2 fits correctly into the side member
3 of the vehicle, next to the
symbol
on the side member;
alert any bystander that the car is
about to be raised; all persons should
be kept away from the car and nobody
must touch it until it has been lowered;
operate the jack handle 1
117
08046J0004EM
118
08046J0012EM
119
08046J0013EM
120
08046J0005EM
121
08046J0006EM
111