8
FIA
T P
ANDA 100HP
fig. 9
F0G0647m
If the car needs to be jacked up on one side, place the slot of the jack in correspon-
dence with the arrow (
O
) on the side member: the finish under the floor is interrupted
A-fig. 9
to enable fitting the jack on the groove
fig. 9
.
JACKING THE CAR
WITH THE JACK
WITH ARM HOIST
fig. 10
F0G0711m
If the car needs to be jacked up, go to a
Fiat Dealership which is equipped with
shop jacks and jack arms.
Jack up the car only by positioning the jack
arms or the shop jack in the points shown
in
fig. 10
.
When jacking the car using
shop jack or jack arms, make
sure the arms are not inter-
fering with the car side skirts.
603.83.473 Panda 100 HP GB 5-07-2007 15:17 Pagina 8
