Fiat Ducato 2021, Owner'S Handbook Manual

Page: 133 / 368

131
SYMBOLS AND MESSAGES ON
THE DISPLAY
The Lane Control also warns the driver
when the vehicle strays out of lane by
displaying symbols and messages on
the instrument panel display.
Versions with analogue display
When the system is active and the
lane limits have not been detected, the
symbol is fixed and white.
Versions with reconfigurable
multifunction display
When the system is active and the lane
limits have not been detected, the lane
lines are grey and a dedicated icon is
shown in the dedicated top area of the
display.
Exiting a lane with detection of a
single limit
When the system is active and only, for
example, the left lane limit has been
detected, a vehicle icon is shown in
the dedicated area of the display; the
system is ready to provide visual
warnings in the event of unintentional
exiting (direction indicator not activated)
of the lane to the left.
When the system detects that the
vehicle has approached the lane line,
the left line on the display turns yellow
and the vehicle icon shown on the
display becomes yellow.
When the system detects that the
vehicle has approached the lane line
and is about to pass it, the left line on
the display (yellow) flashes and the
vehicle icon shown on the display turns
yellow.
The system operates in the same way,
but mirrored, in the event of exiting the
right lane when only the right lane limit
has been detected.
Exiting a lane with detection of
both limits
When the system is active, the lane
lines on the display become white to
indicate the successful detection of the
limits.
When both lane limits have been
detected, the vehicle shown in the
graphic icon on the display changes
green and the system is ready.
In accordance with the different
conditions detected, the system can
attract the attention of the driver by
altering the lines that identify the lanes
on the display. In particular, the system
can alter their colour (from white to
yellow and vice versa), and make them
flash. Equally, the system alters the
colour of the vehicle icon shown on the
display.
Changing the system settings
The settings of the system can be
changed through the Uconnect™
system (see description in the
dedicated supplement).
System limited operation warning
32) 33)
If the dedicated message is shown
on the display, a condition limiting the
system operation may have occurred.
The possible reasons of this limitation
are something blocking the camera
view or a fault.
If an obstruction is signalled, clean the
area of the windscreen by the interior
rear-view mirror and check that the
message has disappeared.
Although the vehicle can still be driven
in normal conditions, the system may
be not completely available.
When the conditions limiting the
system functions end, this will go back
to normal and complete operation.
Should the fault persist, contact a Fiat
Dealership.
No hands on steering wheel
detection
If the system detects no hands from
the steering wheel during active system
intervention, the system will produce an
escalation of visual-acoustic warnings,
which will take 15 seconds to invite
the driver to put the hands on the
steering wheel. If you do not put your
hands on the wheel within this time, the
system will disconnect and provide an
additional warning for 5 seconds.