Fiat 500L 2018, User Manual

Page: 91 / 180

To Set A Desired Speed
Turn the Speed Control on . When the vehicle has
reached the desired speed, push the SET (+) or
SET (-) button and release
. Release the accelera-
tor and the vehicle will operate at the selected
speed
.
NOTE:
The vehicle should be traveling at a steady speed
and on level ground before setting the speed
.
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button
.
The driver’s preferred units can be selected
through the Uconnect settings if equipped
.
Refer
to "Uconnect Settings” in “Multimedia” in the
Owner’s Manual for more information
.
The speed
increment is dependent on the selected speed
unit of U
.
S
.
(mph) or Metric (km/h):
U
.
S
.
Speed (mph)
• Pushing the SET (+) button once will result in a
1 mph increase in set speed
.
Each subsequent
tap of the button results in an increase of
1 mph
.
• If the button is continually pushed, the set speed
will continue to increase until the button is
released, then the new set speed will be
established
.
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a
1 km/h increase in set speed . Each subsequent
tap of the button results in an increase of
1 km/h
.
• If the button is continually pushed, the set speed
will continue to increase until the button is
released, then the new set speed will be
established
.
To Decrease Speed
When the Speed Control is set, you can decrease
speed by pushing the SET (-) button
.
The driver’s preferred units can be selected
through the Uconnect settings if equipped
. Refer
to "Uconnect Settings” in “Multimedia” in the
Owner’s Manual for more information
.
The speed
decrement is dependant on the selected speed
unit of U
. S . (mph) or Metric (km/h):
U
.
S
.
Speed (mph)
• Pushing the SET (-) button once will result in a
1 mph decrease in set speed
.
Each subsequent
tap of the button results in a decrease of
1 mph
.
• If the button is continually pushed, the set speed
will continue to decrease until the button is
released, then the new set speed will be
established
.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a
1 km/h decrease in set speed . Each subsequent
tap of the button results in a decrease of
1 km/h
.
• If the button is continually pushed, the set speed
will continue to decrease until the button is
released, then the new set speed will be
established
.
89