• Push and release the
up
arrow button to scroll
upward through the main menu and submenus
.
• Push and release the
down
arrow button to
scroll downward through the main menu and
submenus
.
• Push and release the
right
arrow button to
access the information screens or submenu
screens of a main menu item
.
• Push and release the
left
arrow button to access
the information screens or submenu screens of
a main menu item
.
• The
OK
button may be used for the following:
– Select
– Reset (hold)
Change Engine Oil Indicator System
Your vehicle is equipped with an engine oil change
indicator system
.
The “Oil Change Required”
message will flash in the instrument cluster display
for approximately ten seconds after a single chime
has sounded to indicate the next scheduled oil
change interval
.
The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate, depen-
dent upon your personal driving style
.
Unless reset, this message will continue to display
each time you turn the ignition is cycled to the
ON or RUN position
.
To reset the oil change
indicator system (after performing the scheduled
maintenance), refer to the following procedure
.
1
.
Turn the ignition switch to the ON position
(do not start the engine)
.
2
.
Fully push the accelerator pedal slowly, three
times within ten seconds
.
3
.
Turn the ignition switch to the OFF/LOCK
position
.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset
.
If necessary, repeat this procedure
.
Instrument Cluster Display Setup Menu
The menu comprises a series of functions ar-
ranged in a cycle
.
The menu includes the following
functions:
• Speedometer
• Trip
– Trip A
– Trip B
• Vehicle Info
– Tire Pressure
– Service
• Audio
• Phone — If Equipped
• Navigation — If Equipped
• Messages
• Settings
– Display
– Safety & Assistance
– Security
WARNING LIGHTS AND
MESSAGES
The warning/indicator lights will illuminate in the
instrument panel together with a dedicated mes-
sage and/or acoustic signal when applicable
.
These
indications are indicative and precautionary and as
such must not be considered as exhaustive and/or
alternative to the information contained in the
Owner’s Manual, which you are advised to read
carefully in all cases
.
Always refer to the informa-
tion in this chapter in the event of a failure
indication
.
All active telltales will display first if
39
