with a manual transmission, whenever the ignition
switch is in the STOP/OFF position. Auto Park Brake is
enabled and disabled by customer selection through the
Customer Programmable Features section of the
Uconnect Settings.
Any single Auto Park Brake application can be bypassed
by pushing the EPB switch to the release position while
the transmission is placed in PARK (automatic transmis-
sion) and the ignition is in the MAR/RUN position.
SafeHold
SafeHold is a safety feature of the EPB system that will
engage the park brake automatically if the vehicle is left
unsecured while the ignition switch is in MAR/RUN.
For automatic transmissions, the EPB will automatically
engage if all of the following conditions are met:
•
Vehicle speed is below 1.9 mph (3 km/h).
•
There is no attempt to depress the brake pedal or
accelerator pedal.
•
The seat belt is unbuckled.
•
The driver door is open.
•
The vehicle is not in the PARK position.
For manual transmissions, the EPB will automatically
engage if all of the following conditions are met:
•
Vehicle speed is below 1.9 mph (3 km/h).
•
There is no attempt to depress the brake pedal or
accelerator pedal.
•
The clutch pedal is not pressed.
•
The seat belt is unbuckled.
•
The driver door is open.
290
STARTING AND OPERATING
Summary of Contents for 500 X 2016
