Fiat 500 X 2016, Owner'S Manual

Page: 164 / 608

position. To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.
1. Turn the ignition switch to the MAR/RUN position.
(do not start the engine.)
2. Fully push the accelerator pedal slowly, three times
within 10 seconds.
3. Turn the ignition switch to the STOP/OFF position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
EVIC Main Menu
The Main Menu is composed of several options that can
be selected using the control buttons above.
NOTE:
•
The display mode of the menu items varies depending
on the type of display.
•
For some items, a submenu is provided.
•
In the Uconnect system, some items on the menu are
not shown on the instrument panel display.
EVIC Menu/Submenu Items
The Menu is composed of the following items:
•
Trip
– Speedometer
– Instantaneous Info
– Trip A
– Trip B
– Best Consumption
162 GETTING TO KNOW YOUR INSTRUMENT CLUSTER