NOTE:
The indicators will automatically turn off when the turn has been completed and the
steering wheel is returned to a straight position.
Lane Change Assist
Tap the lever up or down once, without moving beyond the detent, and the turn
signal (right or left) will flash three times. Then, the turn signal (right or left) will
automatically turn off.
Headlights
Rotate the end of the multifunction lever upward to the first detent for headlight
operation.
NOTE:
When the headlights are turned on, the Daytime Running Lights will be deactivated.
Parking Lights
To turn on the parking lights, remove the key or turn the ignition to OFF/LOCK
position and turn on the headlights.
High Beams
With the low beams activated, push the multifunction lever towards the instrument
panel to turn on the high beams. Pull the multifunction lever toward the steering
wheel to turn off the high beams.
Flash-To-Pass
You can signal another vehicle with your headlights by lightly pulling the multifunc-
tion lever toward the steering wheel. This will turn on the high beams until the lever
is released.
Follow Me Home/Headlight Delay
When this feature is selected, the driver can choose to have the headlights remain
on for a preset period of time.
Activation
Remove the key or turn the ignition to the STOP (OFF/LOCK) position, and pull the
multifunction lever toward the steering wheel within two minutes. Each time the
lever is pulled, the activation of the lights will be extended by 30 seconds.
The activation of the lights can be extended to a maximum of 210 seconds.
Deactivation
Pull the multifunction lever toward the steering wheel and hold it for more than two
seconds.
OPERATING YOUR VEHICLE
53
Summary of Contents for 500 ABARTH CABRIO 2017
