Fiat 1995 Bravo Owner'S Handbook Manual Download Page 276

Page: 276 / 299

Weights (kg)

1.6 MultiJet

2.0 MultiJet

Unladen weight (with all fluids, fuel tank filled
to 90% and without optional equipment)

1320

1360

Payload :

(*)

including the driver:

510

Maximum permitted loads :

(**)

– front axle:

1060

– rear axle:

860

– total:

1830

1870

Towable loads

- braked trailer:

1300

- non-braked trailer:

500

Maximum load on roof :

(***)

Maximum load on ball joint (braked trailer):

(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen car weight increases, thus reducing the specified payload with

respect to the maximum permitted loads.

(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within

the maximum permitted loads.

(***) Lineaccessori Fiat roof rack bars, max capacity: 50 kg.

272

GETTINGTOKNOW

YOURCAR

SAFETY

STARTINGAND

DRIVING

WARNINGLIGHTS

ANDMESSAGES

INANEMERGENCY

SERVICINGAND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

Summary of Contents for 1995 Bravo












































































































































































































































































































Search results

Summary of Contents for 1995 Bravo

Reviews:

Related manuals for 1995 Bravo

Brands by name

Popular brands

Fiat 1995 Bravo, Owner'S Handbook Manual

Search results

Summary of Contents for 1995 Bravo

Reviews:

Related manuals for 1995 Bravo

Brands by name

Popular brands