Fiat 1981 Spider 2000 Page 59 Owner'S Manual Download

Page: 59 / 68

Prolonged Inactivity

If the car is to remain inactive over long periods, It is advisable

to carry out the following operations:

• Clean and protect the painted areas with silicone wax, Coat

the bright metal parts with a standard chrome preservant.

• Store the car in a covered, dry and ventilated place.

• Ensure that the parking brake is released.

• Disconnect the battery terminals.

• Remove the wiper, blades and coat with talc.

• Open the door windows slightly.

• Protect the car using a non-plastic car cover. This should

not be waterproof.

• Check the tire inflation pressure periodically.

• Check the battery charge every iy

month. When necessary,

use a slow 24 hr. charge.

• Do not empty the cooling system.

Summary of Contents for 1981 Spider 2000





































































Search results

Summary of Contents for 1981 Spider 2000

Reviews:

Related manuals for 1981 Spider 2000

Brands by name

Popular brands

Fiat 1981 Spider 2000, Owner'S Manual

Search results

Summary of Contents for 1981 Spider 2000

Reviews:

Related manuals for 1981 Spider 2000

Brands by name

Popular brands