27
RANGE OF SETPOINT ADJUSTABLE BY MEANS OF REMOTE CONTROL
Interval of temperature setting with high
temperature system (JP7 = 0)
30 °C
÷
75 °C - step 1 °C
Pre-set value: 60 °C
Interval of temperature setting with low
temperature system (JP7 = 1)
15 °C
÷
40 °C - step 1 °C
Pre-set value: 30 °C
Temperature setting range internal tank or
external with probe
30 °C
÷
65°C - step 1°C
Pre-set value: 60 °C
Instant DHW temperature setting range
30 °C
÷
60 °C - step 1 °C
Pre-set value: 50 °C
FUNCTIONING OF BOILER ELEKTRA WITH REMOTE CONTROL
The actuation of heating mode takes place after an heating request from remote control
(value of heating setpoint calculated by remote control higher than heating setpoint set by
the user on remote control divided by two) and in the winter mode status. It also enabled
the relay which controls the valve opening area managed by Enchrono.
HOT SANITARY WATER MODE (if only JP8 = 0)
The electric board of Elektra operates in the same way described previously. The destre
setpoint is set by the user on the remote control. Through the Enchrono OT1/OT2 you can
enable the ECO/COMFORT by pressing
P
. When the ECO function is active, the temperature
of sanitary and the symbol
H
is the alternating temperature. In the COMFORT mode, the
temperature of the hot water circuit appears fixed only when there is a request by the micro
sanitary.
CONTROL PANEL IN USER MODE
The pressure of one key/two keys activated the backlighting of LCD display.
Key
Function
-
H
(
J5
)
Disabled in Opentherm mode
+
H
(
J6
)
Disabled in Opentherm mode
ON/OFF
(
J7
)
Unlock error of safety thermostat - exit temperature visualization
MODE
(
J4
)
Disabled in Opentherm mode
+
I
(
J2
)
Disabled in Opentherm mode
-
I
(
J3
)
Disabled in Opentherm mode
-
H
+
+
H
(
J5 + J6
)
Enabling of Eco/Comfort function (only if JP8 = 0 and P8 = 0)