FIAM. LLT20/2 Product Information Download Page 9

Cleaning and care

Disclaimer

• Cleaning

Some household and furniture cleaning products may damage the float glass from which the LLT Table is made.
When cleaning the glass of the LLT Table, use a damp cloth or leather with washing up liquid or soft soap if necessary. Do not 
use powder detergents or detergents containing abrasives for cleaning the LLT Table, since they may scratch the float glass.

• Care

The LLT Table requires regular care to keep it in peak condition and ensure safety.
If the LLT Table or any part of it is chipped or broken, contact the producer or the sales outlet where the product was purchased 
for the technical and shape specifications of the LLT Table or the damaged part, remembering to quote the identification code and 
the letter code embossed on the curved element.

The manufacturer refuses all liability for improper uses of the LLT Table and/or for failure to comply with the contents of this 
technical information resulting in injury and/or damage.

Technical specifications

Any load heavier than stated above may reduce the table’s stability and/or safety and/or cause breakage.

Materials

4

5

3

Top structure:
Float glass,
19 mm thick

Frame structure:
Float glass,
19 mm thick

Details:
Stainless steel

Plates:
Aluminium/vulcanised PVC, 10 mm

Top load-bearing capacity:
150 Kg.

The product is made with glass recyclable to 100%.

Summary of Contents for LLT20/2

















Reviews: