Manual for motor FM_VM R5_R7 ( Date of publication 01/2018)
FIALA PROP s.r.o, Vysoká 56, 75641 LEŠNÁ , Czech Republic , e-mail: [email protected]
www.fialaprop.com
Page 2
If the motor or the whole model with this motor provide another person, tell him safety
instructions and operating instructions. If you do these guidelines and / or instructions lost
or destroyed, you can re-download them from our website.
Please take great care in securing the motor in model and check it regularly. Likewise,
check the propeler mounting screw.
It is not allowed to move when the engine is running in the plane of rotation of the
propeller and in front of it (in the case of classical, towing arrangement - CW). Attention to
touch the spinning propeller! When you start your model and warming up the motor well
secured against rolling away, preferably with qualified persons.
Do not allowed to play near the running motor small children and bad moving people also
make sure pets.
Before every start, pay attention to the condition of the propeller. Damaged, chipped or
unbalanced propeller can dismantle the entire model, motor pull from model, no matter
how well done by you and even fatally injure persons standing nearby. Do not attempt to
repair a damaged propeller, it is very dangerous and it always prefer to immediately
replace for the same type and parameters. Use a good quality propeller manufacturers,
designed for petrol motors. We recommend using propellers Fiala, which is developed and
produced by ourselves.
Do not start the engine in an enclosed space, but only in open spaces.
After stoping the motor, keep in mind that the whole motor including muffler is very hot
and can cause burns. Therefore let the motor before checking or servicing to cool down
completely.
Follow the rules of fire safety, smoke, etc., model and motor is full of petrol. Likewise,
please protect your eyes and mucous membranes before the petrol.
Please follow the general rules for your own safety and also for bystanders and use your
own common sense according to the principle - what could theoretically happen, will also
one day become.
Note .: Our advice to the conclusion - many modelers have for complex, large and
expensive models prepared their own list of performing pre and control operations, so-
called - Check List. It can still be advantageously incorporate a list of specific control
operations on the motor and drive unit as a whole.
