ON3 SETUP
FIA On3 and On3-xr User’s Guide
17
Powering the On3
To turn on the On3 Digital Media Player and Library, you must first press
the large power button located on the front of the unit. This applies power
to the internal hard drive initializes the data on the On3. This power button
can remain on at all times.
Using the On3 Remote Control, press the red power button to activate the
internal video processor.
While the On3 unit is powering up, the blue LED will flash. Once the
LED is on steady, the unit is ready to use.
Depending on how you connected the On3 to your video display device, it
may be necessary to switch the video input setting on your display.
Usually, this is a button on either the television’s remote control or front
display labeled “video.”
At this point, your television should display the following menu screen:
