FHM FH-DW30, Operation And Parts Manual

Page: 22 / 38

5.6 CONTROLS
All controls are conveniently positioned next to
where the operator would stand when feeding
the machine to provide easy operation. Review
this section to familiarize yourself with the loca-
tion and function of each control before starting.
1 Deflector Position:
Each discharge hood is equipped with a
deflector on the end to place the chips
exactly where desired.
Manual Clamp:
The deflector is held in place by clamp-
ing bolts on each side. Loosen the
clamps, move the deflector and tighten
the clamps. Position as desired.
2. PTO Control:
If you are not familiar with the location of
the PTO control on your tractor, review
your tractor's Operator's Manual.
Always
engage the PTO control slowly when the
engine is running at low idle RPM.
Disen-
gage the PTO control slowly at low RPM
to
allow the machine to slow and stop
before
engaging the PTO brake. Remember
the
PTO drives the rotor. When the PTO is
engaged the rotor will also start to turn.
19
FH-DW30