Fhiaba Integrated Series, Installation Manual

Page: 31 / 72

EN
31 www.fhiaba.com · info@fhiaba.com
EN
> Move at the back of the appliances to mount the
joining brackets: fix on side of the top and lower
brackets to one of the appliances and subsequently
to the other
[ 2 ] .
> Place the two units side by side and join them at
the front attaching the two profi les with the sup-
plied screws
[ 3 ] . Attach the bracket on top of the
units as per figure [ 4 ] .
> Finish off by mounting the central cover frame
onto the central profiles, by pushing it until a click
is heard
[ 5 ] .
> Once completed the previous steps, push the
units in their final position [ 6 ] .
If the units are to be installed inside a niche or
within an enclosed structure, it is necessary to de-
sign a ventilation shaft at the back of the niche to
assure proper ventilation at the back of the unit of
about 20mm. Always mount front panels on door
and drawer before pushing the unit into its final po-
sition inside the niche or structure.
> Check the levelling of the appliance, adjusting its
feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets by
fixing to these the side profiles previously mounted
on the appliance
[ 7 ] . To make this operation easier
keep the door and the drawer open.
> Mount the covering frames onto the profiles, first
insert them laterally and then push firmly until a
“click” is heard
[ 8 ] .
5
7
8
6
2
3 4