30
www.fhiaba.com · [email protected]
6.1 Built-in installation
single appliance
For a built-in installation, to close gaps between
the appliance and the adjacent cabinets, special
side profiles and aluminum covering frames are
provided.
Operate as follows:
>
Push the appliance into the installation niche
[ 1 ]
.
>
If the unit is to be installed inside a niche or
within an enclosed structure, it is necessary to
design a ventilation shaft at the back of the ni-
che to assure proper ventilation at the back of the
unit. A 5 mm gap is sufficient to prevent overhe-
ating. Always mount front panels on door and
drawer before pushing the unit into its final posi-
tion inside the niche or structure.
>
Secure the appliance to the adjacent cabinets
by fixing to these the side profiles previously
mounted on the appliance
[ 2 ]
.
To make this operation easier keep the door and
the drawer open.
>
Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
>
Mount the profiles the covering frames: first in-
sert them laterally and then push firmly until a
“click” is heard
[ 3 ]
.
6. INSTALLATION
Side profiles mounting:
A
Connecting element
B
Alluminium frame
6.2 Built-in installation two or more
appliances
Required accessories to be ordered separately:
>
Central connection Kit (KCC)
Special side profiles and aluminum cove-
ring frames are provided for closing gaps
between the appliance and the adjacent ca-
binets.
Operate as follows:
>
Position the appliances in front of the installation
area, leaving enugh space to operate at their back
[ 1 ]
.
IMPORTANT: The following instruction for installation apply to all Fhiaba models.
B
A
6,5 (
¼”
)
6,5 (
¼”
)
20 (
¾”
)
20 (
¾”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
22 (
7⁄8”
)
Appliance
Wall or furniture
1
3
1
2
Summary of Contents for Integrated Series
