Fhiaba FP18FZC-LS1, Installation Manual

Page: 34 / 144

www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222) www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
34
5. PANELS MOUNTING
5.8 Panels dimensions: single bottom-drawer
Panels can have thickness ranging between 18 mm (3/4”) and 28 mm (1-1/8“).
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg
(25 lbs). Exceeding these weights could void your warranty for any service issues which can be attributed to
overweight panels.
The hinging mechanism on Fhiaba appliances is considered to be `Zero-clearance`. The door and drawer widths
specified below assume the minimum cutout width is being used and a 3.5mm (1/8”) reveal is desired around
the panels. Adjust your panel dimensions accordingly to your own design criteria considering your cutout width
and your reveal. Minimum reveal / gap should not be less than 1.5mm (1/16”).
SERIES DOOR/DRAWER WIDTH A DOOR CUTOUT WIDTH B
36” 908 (35 3/4”) 627 (24 3/4”)
30” 756 (29 3/4”) 477 (18 3/4”)
24” 604 (23 3/4”) 327 (12 7/8”)
Example:
84” cutout height
36” cutout width
4” toe kick height
1/8” gap desired all around Door panel:
Width: 35-3/4”
Height: 54-3/4”
Drawer panel:
Width: 35-3/4”
Height: 84”-1/8”-54-3/4”-1/8”-4”=25”
If you want a 6” toe kick height then your bottom drawer panel
height would be 23”
2121 (83
½
") + 25 (1")
min 540 (2
1
¼”
)
max 635 (25”
)
A B
3 ( 1⁄8” )
1390 (54
¾”
)
115 (4 ½” )
min 200 (7
7⁄8”
)
135
(5
3⁄8”
)
135
(5
3⁄8”
)
1075 (42
3⁄8”
)