28
Manual Upgrade
3.2.3.2
In this submenu you can perform a telephone software upgrade. The greatest care is
to be taken in doing so. It is to be ensured that only one InduTel IP ever accesses
the TFTP server at the same time, otherwise a corruption of the transferred data will
be caused and the upgrade process fails.
Caution
Never use the update function, if step 2 was not successful.
The parameter
"Automatic Reset to Default Settings"
defines if your current
user settings will be kept or deleted when executing step 3a.
Note
If you update from version 1.0 r7xx to version 1.0 r8xx or higher,
then the parameter
"Automatic Reset to Default Settings"
must
be set to
"enabled"
. Keeping the user data is not possible.
Step 1:
Press the
"Save Settings"
button and check carefully whether the shown
settings are correct.
Step 2:
Check whether there is a connection to the TFTP server by means of
"Probe Connection"
. For this purpose, the file designated in
"Enter Testfile
Name"
is downloaded from the given server by means of TFTP and, if successful,
the content is shown on the webpage. In order to avoid complications it is recom-
mended to use a small file.txt with a little content like
"Download Successful".
If
this is not successful, an error message appears.
Step 3a:
Start the update by means of
"Update Now"
or
Step 3b:
Install a new set of tones by means of
"Install Sounds"
Summary of Contents for InduTel IP
