FHF InduTel IP, Operating Instructions Manual

Page: 19 / 48

19
Configuration 3.2.2
In order to save the entered data on the following menus, the "Apply Changes"
button must be clicked.
For the changes to take effect, the telephone must be restarted ( "reboot" ).
Network Settings 3.2.2.1
In this submenu you can choose whether the IP address is to be assigned dynamical-
ly via the network (DHCP) or manually. In case of manual assignment, the fields
"Subnet Mask" and "Gateway Address" must additionally be entered in respect
to the network parameters. You can also configure the IP address of an NTP server
so that the date and time (GMT) in the bottom left-hand corner of the web server
are shown correctly.
In the field "IP Address" will be always shown the actual IP address. Therefore a
dynamically received IP address can be used static. If the DHCP server transfers a
NTP address, this information will be used nether the less to the information in the
field
"NTP Server" . If the DHCP server distributes more than one NTP address, then
the first one will be used.
For the identification of the telephone in a network a host name can be defined. The
length is limited to 255 characters and may consist of the characters [a-z][A-Z][0-
9][-] and [.] (RFC952). With the field
"Append MAC-Address" the MAC address of
the telephone can be appended to the host name for a unique identification. If the
field is activated and the host name is not set, then the MAC address only (without
leading hyphen) will be used as host name.
For supporting compatibility with windows networks a NetBIOS name and a
workgroup can be defined and activated with the field "Use NetBIOS name" .
With the parameters below "Fallback Settings" can be defined the network set-
tings to be used, if the phone is set to DHCP client mode and no DVCP server is
reachable. This configuration will be displayed at the
"Info" page. The host name in
this case is not changeable and consists always of the string "ERR" followed by the
MAC address of the telephone.