FFV DigiDecK User Manual Download Page 24

DigiDeck digital video recorder

 Manual, Fast Forward Video, Inc. Revised 1/20/04   

24

 

 

 

 

 

 

Bookmark limits 

There is no limit to the number of bookmarks you may have, except that there can only be one 
bookmark per frame. 
 

Speed changes at bookmarks 

When the deck plays past a bookmark set with a speed change, it will change the deck to the new 
speed.  Remember, this is a one-way change.  Your original speed will not later be restored 
automatically. 
 
Tip:  Set a bookmark with your original speed at the beginning of the play list, so whenever you recue, 
you’ll restore your desired starting speed. 
 

Speed ramps at bookmarks 

Instead of setting an abrupt speed change at a bookmark, you may set a speed ramp between two 
bookmarks.  Set the first bookmark as “Begin ramp”, and give it your initial speed.  Set the second 
bookmark as “End ramp”, and set the terminal speed.  The software will gradually ramp from the first 
speed to the last speed between the bookmarks.  Remember, this is a one-way change.  Your 
original speed will not later be restored automatically. 
 
Tip:
  Set a bookmark with your original speed at the beginning of the play list, so whenever you 
recue, you’ll restore your desired starting speed. 
 

Changing bookmark location 

While you cannot drag a bookmark to a new location, you can right-click on it and select “Change 
location.” Features 

 
Insert source clip / add source clip (play list) 

If you right-click on a play list entry, the first two menu items that appear are “Insert source clip” and 
“Add source clip.”  These will both show you the names of all clips in the current source folder.  
Selecting a clip will either insert it before or add it after the current entry.   
 
With these two menu items, you can avoid switching to the source list window to add another clip to 
your play list. 
 

Split clip (play list) 

Splits the current clip into two clips; the current frame becomes the out-point of the first clip, and the 
next frame becomes the in-point of the new clip. 
 

Auto split clip (play list) 

In a play list entry with multiple bookmarks, auto split clip will split the clip at each bookmark. 
 

Generic bookmarks 

Ctrl+B will allow you to drop a bookmark at the current frame, while recording or playing back, in the 
play list or source list. 
 

Bookmark navigation 

Tab and shift+tab will jump you to the next and previous bookmark.  This is great for sports instant-
replay uses – drop a bookmark during record, whenever there’s interesting action, and instantly jump 
to it on playback.  Then hit Tab, and jump to the next bookmark. 
 

Bookmarks on the timeline 

Left clicking on a bookmark will jump to it.  Right-clicking on a bookmark pulls up a properties menu 
that allows you to set the name, hotkey, speed, and whether it’s the beginning or end of a speed 
ramp. 

 
 

 

 

 

 

 

 

Summary of Contents for DigiDecK



























Reviews: