FFES Z00, Instruction Manual

Page: 10 / 21

FFES- FABRYCKI FUTURE ELECTRONIC SOLUTIONS 2016
10
2.8.6 Language
The controller supports Polish, English and German language, which can be changed at
any time.
2.9 Musicotherapy
In versions ZXXB, the controller is equipped with a Bluetooth module supports A2DP.
So devices supporting this technology are able to work with the controller and play music
on the speakers mounted in the sauna. For establish communication, you must exit standby
mode. After entering standby mode communication is broken, it is impossible to establish
the connection. The source device first step is the launch of BT, then connect to the "FFES
AUDIO" and start your playlist. After that the devices are paired, if you change the source
device, the process must be repeated. The status of the connection is indicated on the
display in the work mode.
Password: 1234 for devices with Bluetooth 2.1 and lower
2.10 Remote control
Each controller FFES ZXX purchased after 10.09.2016r. is equipped with an additional
slot for the Wi-Fi module "ZXXW." This module acts as the access point to which you can
connect one device. Control of sauna is done using the "FFES Sauna" application, available
in the Google Play store. To start the control of the sauna, in the device with android
system , need to run your Wi-Fi card and connect to the network "FFES Sauna." The
application is a reflection of the control panel with limited service mode.
2.11 Smart home
Controllers FFES version of "Smart home" work with intelligent home systems. This
feature is available for all series ZXX without models for wet saunas, allows for the start of
the last selected program.
For to adapt functions, use potential free contacts smart home controller. One of the
terminals should be connected to the "PC" controller FFES, the second contact to the
neutral mains.
Contact closure starts the last set program, but their opening causing the transition to
standby mode.