FFC LAF2501 Operator And Parts Manual Download Page 23

Limited Warranty

Except  for  the  Excluded  Products  as  described  below,  all  new  products  are  warranted  to  be  free  from  defects 

in  material  and/or  workmanship  during  the  Warranty  Period,  in  accordance  with  and  subject  to  the  terms  and 

conditions of this Limited Warranty.  

1. 

Excluded Products.  The following products are excluded from this Limited Warranty:

(a)  Any cable, part that engages with the ground (i.e. sprockets), digging chain, bearing, teeth, tamping 

and/or demolition head, blade cutting edge, pilot bit, auger teeth and broom brush that either constitutes or is part 

of a product.

(b)  Any product, merchandise or component that, in the opinion of Paladin Light Construction

1

, has been 

(i) misused; (ii) modified in any unauthorized manner; (iii) altered; (iv) damaged; (v) involved in an accident; or (vi) 

repaired using parts not obtained through Paladin Light Construction.

 

2. 

Warranty Period.  The Limited Warranty is provided only to those defects that occur during the Warranty 

Period, which is the period that begins on the first to occur of: (i) the date of initial purchase by an end-user, (ii) the 

date the product is first leased or rented, or (iii) the date that is six (6) months after the date of shipment by Paladin 

Light Construction as evidenced by the invoiced shipment date (the “Commencement Date”) and ends on the date 

that is twelve (12) months after the Commencement Date.

3. 

Terms and Conditions of Limited Warranty.  The following terms and conditions apply to the Limited Warranty 

hereby provided:

 

(a) 

Option to Repair or Replace. Paladin Light Construction shall have the option to repair or replace 

the product.

(b) 

Timely Repair and Notice.  In order to obtain the Limited Warranty, (i) the product must be repaired 

within thirty (30) days from the date of failure, and (ii) a claim under the warranty must be submitted to Paladin Light 

Construction in writing within thirty (30) days from the date of repair. 

 

(c) 

Return  of  Defective  Part  or  Product.    If  requested  by  Paladin  Light  Construction,  the  alleged 

defective part or product shall be shipped to Paladin Light Construction at its manufacturing facility or other location 

specified by Paladin Light Construction, with freight PRE-PAID by the claimant, to allow Paladin Light Construction 

to inspect the part or product. 

Claims that fail to comply with any of the above terms and conditions shall be denied. 

LIMITATIONS AND EXCLUSIONS

.

THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE 

AND ANY WARRANTY BASED ON A COURSE OF DEALING OR USAGE OF TRADE.

IN NO EVENT SHALL PALADIN LIGHT CONSTRUCTION BE LIABLE FOR CONSEQUENTIAL OR SPECIAL 

DAMAGES.

IN  NO  EVENT  SHALL  PALADIN  LIGHT  CONSTRUCTION  BE  LIABLE  FOR  ANY  LOSS  OR  CLAIM  IN  AN 

AMOUNT IN EXCESS OF THE PURCHASE PRICE, OR, AT THE OPTION OF PALADIN LIGHT CONSTRUCTION, 

THE REPAIR OR REPLACEMENT, OF THE PARTICULAR PRODUCT ON WHICH ANY CLAIM OF LOSS OR 

DAMAGE IS BASED.  THIS LIMITATION OF LIABILITY APPLIES IRRESPECTIVE OF WHETHER THE CLAIM 

IS BASED ON BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHER CAUSE AND 

WHETHER THE ALLEGED DEFECT IS DISCOVERABLE OR LATENT.  

1

Attachment  Technologies  Inc.,  a  subsidiary  of  Paladin  Brands  Holding,  Inc.  (PBHI)  is  referred  to  herein  as  Paladin  Light 

Construction.

February 10, 2010

Summary of Contents for LAF2501

























Reviews: