FFC LAF1142 Operator And Parts Manual Download Page 6

 

2/09/09

MR15533

4

SAFETY STATEMENTS

 

 

THIS SYMBOL BY ITSELF OR WITH A WARNING WORD THROUGHOUT 

T

HIS  

 

 

MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING  

 

 

YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS.  FAILURE TO FOLLOW  

 

 

THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

 

DANGER

 

THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH WILL  

 

 

 

RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

 

WARNING

 

THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH   

 

 

 

COULD RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

 

CAUTION

 

THIS SIGNAL WORD IS USED WHERE MINOR INJURY COULD RESULT IF

 

 

 

THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

 

NOTICE

 

NOTICE INDICATES A PROPERTY DAMAGE MESSAGE.

 

 

GENERAL SAFETY PRECAUTIONS

WARNING!  READ MANUAL PRIOR TO INSTALLATION

 

 

Improper installation, operation, or maintenance of this equipment could result in

 

 

serious injury or death.  Operators and maintenance personnel should read this manual,  

 

 

as well as all manuals related to this equipment and the prime mover thoroughly   

 

 

before beginning installation, operation, or maintenance.  

FOLLOW ALL SAFETY  

 

 

INSTRUCTIONS IN THIS MANUAL AND THE PRIME MOVER'S MANUAL(S).

 

 

READ AND UNDERSTAND ALL SAFETY STATEMENTS

 

 

Read all safety decals and safety statements in all manuals prior to operating or               

 

 

working on this equipment.  Know and obey all OSHA regulations, local laws,  

 

 

 

and other professional guidelines for your operation.  Know and follow good work  

 

 

practices when assembling, maintaining, repairing, mounting, removing, or  

 

  operating 

this 

equipment.

 

 

 

KNOW YOUR EQUIPMENT

 

 

Know your equipment’s capabilities, dimensions and operations before operating.   

 

 

Visually inspect your equipment before you start, and never operate equipment that 

 

 

is not in proper working order with all safety devices intact.  Check all hardware to  

 

 

ensure it is tight.  Make certain that all locking pins,  latches, and connection devices  

 

 

are properly installed and secured.  Remove and replace any damaged, fatigued, or  

 

 

excessively worn parts.  Make certain all safety decals are in place and are legible.   

 

 

Keep decals clean, and replace them if they become worn and hard to read.

 

 

 

 

 

 

 

Summary of Contents for LAF1142






















Reviews: