2/09/09
MR15533
8
SAFETY SIGN LOCATIONS
The diagram on this page shows the location of the decals used of the FFC Log Grapple. The
decals are identified by their part numbers, with reductions of the actual decals located on the following
page. Use this information to order replacements for lost or damaged decals. Be sure to read all
decals before operating the attachment. They contain information you nee to know for both safety and
product
longevity.
INSTRUCTIONS
• Keep all safety signs clean and legible.
• Replace all missing, illegible, or damaged safety signs.
• Replacement parts for parts with safety signs attached must also have safety signs attached.
• Safety signs are available, free of charge, from your dealer or from FFC.
P
LACEMENT OR REPLACEMENT OF SAFETY SIGNS
1. Clean the area of application with non-flammable solvent, and then wash the same
area with soap and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing the adhesive surface.
4. Apply the safety sign to the position shown in the diagram above and smooth out
any bubbles.
Serial # Tag
RDL3139
40150
50-0724
RDL3103
RDL3139
50-0737
