15
EN
HOW DOES IT WORK
Before first use, clean the inside of the unit by rubbing with a damp sponge, towel
or non-abrasive cloth
and then rub with a non-abrasive dry towel. Thoroughly clean the inside of the cauldron and make sure it
is properly placed in the supports before starting using it.
1.
Before starting, look for a flat surface near an electrical outlet. Make sure that
the power cord is away
from any source of water supply. If necessary, the use of an
extension cable is acceptable.
2.
Collect supplies to make popcorns: corn for popcorns, seasonings, bowls or bags
to contain the
popcorns, cooking oil, measure for the cauldron and bucket to mea-sure the oil. (The last ones are
included in the unit).
3.
Plug the equipment into the power switch in the OFF position.
4.
Make sure the cauldron is firmly secured in the supports.
5.
Make sure that the cauldron's motor is fully plugged into the socket on the bot-tom of the cauldron.
NOTE: Cauldron will not heat up in case the plug is not fully
inserted.
6.
Turn the appliance ON by turning the switch on the top of the machine. Let the
appliance work for 3 to
5 minutes to heat the pot.
7.
Turn off the unit.
8.
Use the Measuring Spoon of Oil that comes with your Popcorn Machine to add to
the Pot two
tablespoons of your favorite oil to make popcorn. For best popping re-sults it is suggested that you use
mild vegetable oil.
9.
Add a cup of popcorn kernels (size 14) to the pot using the supplied measuring
cup.
10. Turn on the unit and close the door. Almost immediately you will hear the crack-le of popcorn. Hot,
hot popcorn will start pouring out of the sloping cauldron tops, just like in the cinema!
11. Once the pot has stopped toasting, tilt the Pot using the red knob on the Crank to release the
popcorn.toasting, tilt the Pot using the red knob on the Crank to re-lease the popcorn.
Summary of Contents for PPCM03
Page 17: ...EN 17 ...
