13
THE PROCEDURE FOR ADJUSTMENT OF BIAS FOR THE RIGHT CHANNEL
1)
Use a digital multi-meter. Set it to either automatic mode, or to manual mode,
to an operating measurement range of 750mV DC. Next, please measure the
differential voltage between MR2 and MR3.
2)
Adjust the balance of the BIAS by gently rotating the BIAS balance
potentiometer AR2, so as to achieve a measured differential value as close as
possible to 0 mV DC (+/-20mV).
3)
Measure the actual value of the BIAS between MR1 and MR2 or MR1 and
MR3.
4)
Adjust the voltage reading using the BIAS level potentiometer AR1 to a value
as close as possible to 350 mV (+/- 20mV).
THE PROCEDURE FOR ADJUSTMENT OF BIAS FOR THE LEFT CHANNEL
Similarly as described in the procedure for the right channel, conduct the
adjustments using potentiometers AL1 AL2 and the measurement points ML1, ML2
and ML3.
Summary of Contents for Silver Luna
Page 1: ...Silver Luna USER S MANUAL...
