Introduction
Thank you for purchasing the FETtec ESC. This is a high-quality sensor-less brush-less electronic 4
in 1 speed control.
Features
•
Active current limiting @ 45A
•
Input voltage: 3S-6S
•
High quality 40V MOSFETs
•
STM32G071 @ 64MHz
•
128 kHz Motor PWM
•
Automatic input signal detection
◦
Dshot 300-2400
◦
PWM
◦
OneShot 42/125
◦
in development: Crossfire, OneWireBus, Sbus, Graupner HoTT
•
Soldering holes for up to 5 additional capacitors
(required for 5S and 6S application)
•
KISS FC Passthrough
•
Betaflight Passthrough (in development)
Safety warning
•
Remove propeller before flashing and configuration!
•
The ESC can heat up to 100°C and more
•
Please ensure that there is enough space and airflow to prevent any damage because of
overheating
•
Please check periodically for firmware updates in the FETtec Configurator
Page 3
